Technical Data Sheet ( TDS)

           YFRSC TDS

CDA Drawings (Dimensions)

          YFRSC Drawing

Certifications

Manual ( IOM)

Options

Detailed Specifications

 Wheel Technology                                                                              

1. Effect of the 4G Wind-Surfer wheel series

• Excellent aerodynamic characteristics and noise characteristics.

• High-efficient area width without overloading.

• Balance quality grade up to G2.5.

2. Air Performance Design

• Optimized design of CFD flow field simulation, repeatedly validated.

• Front disc and inlet venture tube according with flow field characteristic.

• Flow passage control: matched each other to restrain the air flow better.

• Optimize the blade angles.

3. Structure Performance Design

• Stress analysis of FEA to improve performance.

• Selected the strengthen structure according to different specifications to improve reliability.

• Using riveting technology to avoid stress.

4. Improved Wheel

• Continues improvement: The wheel has the 4th generation.

• Compared with the 2nd generation: Performance increased by 5-10% in the same parameters.

• Compared with the 2nd generation: Noise reduced 2-3 db(A) in the same parameters.

5. Advanced Process

• Inlet venture tube & Front disc: spun process to ensure streamlines aerodynamic characteristics.

• Inlet venture tube: replace bell mouth to ensure smooth air flow.

• Blades: once punch forming to ensure process quality.

• Tooling: dedicated fixture to ensure precise install of the blades.

General Features

1. Excellent Aerodynamic and Sound Characteristics

• Compared with 4th generation Wind-surfer wheel: Performance increased by 5-10% and noise reduced 2-3Db (A) in the same condition.

• Compared with axial/mixed flow fans, sound reduced by 10~15dB (A).

• Fan internal with well-organized airflow and the pressure loss is small.

• Wide performance range of high efficiency.

2. Reliability Design

• FEA aided design, distributed evenly of stress for making operation reliable.

• Performance loss caused by working point change.

• High static pressure: Low RPM in same pressure.

• Blade falling resistant: Safe.

• Non-overloading.

3. Appearance Design

• Low streamline wind band: reduces wind load.

• Pitched wind band baffle: drains snow rapidly by gravity.

• Suitable for strong winds.

• Modernize buildings with enhanced taste.

4. Detail Design

• Upward air intake: effectively prevented the incoming air mixing with rain water.

• Roof curb cap: easy to assemble and water leakage is prevented.

• Insect screen for intake.

• INFI-COAT Molecular Film TM: long-lasting coating.

5. Advantages of Direct Drive: Efficient, maintenance-free

• Higher transmission efficiency.

• No wearing parts, low maintenance.

• Easier and more effective of maintenance.

• Sealed self-lubricating bearing for motor, increasing service life.

• Motor located the airflow: active cooling.

6. Advantages of Belt Drive: Precise, adjustable

• More precise selection up to the requirements of design conditions.

• Easier maintenance and replacement of motor.

• Independent bearings to bear the vibration, extending bearing life.

• Design change: can be adjusted flexibly.

Technical Information

1. Quality Standards

The fan has designed according to AMCA design procedure, The products are produced within very control procedure following ISO 9001, ISO14001 and ISO 45001.

2. Fan Type

The fan shall be the centrifugal fan which adopts backward inclined centrifugal wheel. The drive type shall be direct-drive or belt-drive. The fan shall use aluminium backward inclined centrifugal wheel, and shall include a wheel cone carefully matched to the inlet Venturi for precise running tolerances. The wheel shall be statically and dynamically balanced to Level G2.5 as per AMCA204 standard.

3. Wind Band

The wind band shall be constructed of heavy gauge galvanized steel a rigid internal support structure. The wind band profile shall be of the streamline type; the structure shall be of the multi reinforced rib type to protect the fan from wind overload; and the external surface shall be pitched to quickly drain rain and snow by gravity.

4. Upward Air Intake

The fan inlet shall have upward air intake to make sure rain would not be sucked into the fan body as well as the building.

5. Motor

The motor shall be carefully matched to the fan load. It shall be (IP55,IP56, …etc) rated with Class F,H Insulation according to project specification . The motor bearing shall be of ball type and lubrication- free. Out of the air stream shall the motor and drive mechanism be located to avoid grease or dirt accumulation.

4. Drive Mechanism (For belt drive type only)

General Brochure